Introduction
The Raspberry Pi IO Case is a high-quality two-piece metal enclosure for Raspberry Pi Compute Module 5 and the Compute Module 5 IO Board. It provides space for accessories connected to the IO Board, such as an M.2 SSD or a PoE+ HAT+.
The IO Case includes slots to enable the connection of CSI-2 cameras or DSI displays and includes a built-in controllable fan to support thermal regulation for higher-power applications. Cut-outs in the side of the case allow access to HDMI, Ethernet, USB-A, and USB-C (power-in) connectors and to the SD card slot. A mounting hole is provided for an external wireless antenna.
Specification
Case
- Form factor: 170mm×94mm×28 mm
- Weight: Approx 350g
- Product material: Sheet metal
DC brushless fan
- Input voltage: 5V DC (3.5-5.5V) supplied via four-pin fan header on a carrier board
- Start voltage: ≥ 3.5V
- Power consumption: 0.85W
- Rated current: 0.18 ± 0.02A
- Fan speed control: Pulse width modulation control with tachometer
- Maximum fan speed: 8000 RPM ± 15% (at 25℃, after 3–5 minutes rotating)
- Maximum airflow: 2.46 CFM
- Noise: 21.7 dB
- Cable length: 150 mm
- Production lifetime: The Raspberry Pi IO Case will remain in production until at least January 2036
- Compliance: For a full list of local and regional product approvals, please visit pip.raspberrypi.com
Documents
Shipping List
- Raspberry Pi Compute Module 5 IO Case x1
| Specification | |
| Accuracy | ± 15% |
| Cable Lenght | 15cm |
| Connector | Gravity |
| Output | Analog |
| Resolution | 0.18 ± 0.02A |
| Power | 5V DC (3.5-5.5V) |
| Range Output | Raspberry Pi Compute Module 5 8000 RPM ± 15% (at 25℃, after 3–5 minutes rotating) 21.7 dB noise |
| Motherboard | |
| USB | USB-A, and USB-C |
Raspberry Pi Compute Module 5 IO Case with DC Brushless Fan
- Brand: Raspberry
- Product Code: FIT1014
- Availability: In Stock
-
$252,000.00
- Ex Tax: $252,000.00