Introduction
This 10 I/Os industrial relay module (relay output) based on Arduino NANO provides a simple and cost-effective solution to the applications of industrial monitoring and control.
It is easy to install and configure, and very flexible thanks to the Open Source-based hardware. With standardized PLC connectors, the 10 I/Os relay module supports RS485, Ethernet, and Optoisolated Input and Output, which could be well suitable for the monitoring, control and automation of your machines, alarms, elevator control, product lines, installations among the most typical applications such as fans, pumps, air conditioning, full HVAC solutions, control of AC and DC motors.
Board Overview
10 I/Os Relay Module - CPU Arduino NANO (Relay Output)
10 I/Os Relay Module - CPU Arduino NANO (Relay Output)
10 I/Os Relay Module - CPU Arduino NANO (Relay Output)
Features
- With 10 I/O interfaces
- Standardized connectors
- Supports RS485
Applications
- Control and automation of machines
- Control of AC and DC motors
Specification
- MCU: Arduino Nano
- Power Input: 12-24V DC
- Input Rated Voltage: 24V DC
- Rated Power: 30W
- Max Current: 1.5A
- Clock Speed: 16MHz
- SRAM: 2KB
- EEPROM: 1KB
- Communication: USB, RS485, Ethernet
- Operating Voltage Range: 11.4~25.4V DC
- Digital Input: 3.3-24V DC(10Hz）
- Digital Isolated Output: 24V DC
- Operating Temperature: 0℃~60℃
- Operating Humidity: 10%~90%
- Storage Temperature: -20℃~60℃
- Ethernet Port
- RS485
- TCP IP
- Modbus TCP
- Modbus RTU
Documents
Shipping List
- 10 I/Os Relay Module CPU Arduino NANO (Relay Output) x1
| Specification | |
| Baud Rate | 9600 - 152000 |
| Output | USB, RS485, Ethernet |
| Power | 12-24V DC |
| Memory | |
| Flash(M) | 12-24V DC |
| SRAM(KB) | USB, RS485, Ethernet |
| Motherboard | |
| USB | USB 2.0 |
| Processor | |
| Clockspeed | 16MHz |
10 I/Os Relay Module - CPU Arduino NANO (Relay Output)
- Product Code: DFR0899
- Availability: In Stock
-
$3,679,200.00
- Ex Tax: $3,679,200.00