DWIN 2.8" Inch Smart Display TTL UART DMG32240C028_03W HMI Touchscreen UART LCD For Arduino

SKU: KU1002 / DMG32240C028_03WTR

2.8 inch smart UART Screen DMG32240C028_03W

Features:
● Self-designed T5L ASIC, 262K Colors,240*320 Pixel ;
● Without touch screen/Resistive touch screen/Capacitive touch screen ;
● TTL/CMOS;10Pin_1.0mm;
● Download via SD card or on-line serial port;
●Two Development System: DGUS II/ TA(Instruction set);
● TN Normal viewing angle, 70°/70°/50°/70° (L/R/U/D) ;

Display Data:
LCD Type TN, TFT LCD
Viewing Angle Normal viewing angle, 70°/70°/50°/70° (L/R/U/D)
Resolution 240×320 pixels (0°/90°/180°/270°)
Color 18-bit 6R6G6B
Active Area (A.A.) 36.7mm (W)×49.0mm (H)

Touch Parameters (WTR)
Type RTP (Resistive touch panel)
Structure ITO film + ITO glass
Touch Mode Single point touch, support continuous sliding touch
Surface Hardness 3H
Light Transmittance Over 80%
Life Over 1,000,000 times touch

Touch Parameters (WTC)
Type CTP (Capacitive touch panel)
Structure G+G structure with surface cover of tempered glass
Touch Mode Single point touch, support continuous sliding touch
Surface Hardness 6H
Light Transmittance Over 90%
Life Over 1,000,000 times touch

Packing List:
● 1x 2.8'' HMI LCD Display

Tools: https://ecdn6.globalso.com/upload/p/1355/source/2024-09/DGUS_V7647-0821.zip

Video Tutorial: https://www.dwin-global.com/t5l-dgus-v7-6-video-tutorial/

Datasheet: https://ecdn6.globalso.com/upload/p/1355/source/2024-11/Datasheet-DMG32240C028_03W1.zip