DWIN 10.1" Inch Smart Display TTL RS232 DMG10600C101_04W HMI Touchscreen UART LCD For Arduino

 SKU: KU5001 / DMG10600C101_04WTR

SKU: KU5002 / DMG10600C101_04WTC

10.1 Inch HMI Touch Display DMG10600C101_04W(Commercial Grade)

Features:
● Based on self-designed T5L ASIC, 10.1 Inches, 16.7M Colors, 1024*600 Pixel TFT LCD;
● 8Pin_2.0mm connection wire,TTL/RS232 available;
● Download via SD card or on-line serial port;
● Dual Development System: DGUS II/ TA(Instruction set);
● No coding skills required, easy-to-use DWIN DGUS V7.6 GUIs Development;
● Widely used witd Arduino,STM32,Microchip ,ESP8266 and so on .
● Flash: 16 MBytes NOR Flash, for fonts, pictures and audio files. Rewrite cycle: over 100,000 times
● Operating Voltage: 6~15V, typical value of 12V

Display Data:
LCD Type IPS, TFT LCD
Viewing Angle Wide viewing angle, 85°/85°/85°/85°（L/R/U/D）
Resolution 1024×600 pixels (support 0°/90°/180°/270°)
Color 24-bit 8R8G8B
Active Area (A.A.) 222.7mm (W)×125.3mm (H)

Touch Parameters (WTR)
Type RTP (Resistive touch panel)
Structure ITO film + ITO glass
Touch Mode Single point touch, support continuous sliding touch
Surface Hardness 3H
Light Transmittance Over 80%
Life Over 1,000,000 times touch

Touch Parameters (WTC)
Type CTP (Capacitive touch panel)
Structure G+G structure with surface cover of tempered glass
Touch Mode Single point touch, support continuous sliding touch
Surface Hardness 6H
Light Transmittance Over 90%
Life Over 1,000,000 times touch

Packing List:
● 1x 10.1'' Inch HMI LCD Display
● 1x Cable HDL65013
● 1x Cable HDL65011

Tools: ecdn6(DOT)globalso(DOT)com/upload/p/1355/source/2024-09/DGUS_V7647-0821.zip

Video Tutorial: dwin-global(DOT)com/t5l-dgus-v7-6-video-tutorial/

Datasheet: ecdn6(DOT)globalso(DOT)com/upload/p/1355/source/2024-11/Datasheet-DMG10600C101_04W2.zip