Arducam IMX477 HQ Camera 12.3MP for Nvidia Jetson Nano / Xavier NX
Arducam IMX477 HQ Camera 12.3MP for Nvidia Jetson Nano / Xavier NX
SKU: KE3015
CODE: B0279
????:This camera is mainly designed for the Jetson Nano. It can also be used on the Raspberry Pi Compute Module (like CM3, CM3+), but is not compatible with standard Raspberry Pi models (like Raspberry Pi 3/3B+/4).
????????:
A Can't-Miss Update to IMX219 - Much better picture quality and lens flexibility, thanks to 53% more pixels, 92% larger pixel size, 192% larger imaging area, and a CS-Mount. Maximum still resolution at 4056 × 3040, frame rates: 30fps@Full 12.3MP, 60fps@1080P. NOTE:
Accelerated by Jetson Hardware ISP Engine - Support NVIDIA Argus Camera plugin for H264 encoding, JPEG snapshots, as well as gain, exposure, framerate, and group, hold control.
Only a driver away from Plug-and-Play - The Raspberry Pi HQ camera module requires hardware modification before installing the Jetson IMX477 driver, which could bring potential damage and void the warranty. Ours don't.
4-Lane Camera for the Future - Route out all 4 data lanes to the camera connector for customized carrier boards with 4-lane CSI connector and future 4-lane camera driver updates.
????????:
Sensor: IMX477
Optical Format: 1/2.3″ (diagonal 7.857mm)
Resolution: 4056(H) x 3040(V) 12.3MP
Pixel Size: 1.55um x 1.55um
IR Sensitivity: Visible light
Interface: 4-lane MIPI CSI-2
Default Lens Mount: CS-Mount
Frame Rate: Due to Jetson Xavier NX/Nano hardware only supports 4K@30fps h.264/h.265 encoding, you cannot use it for 4K@60fps.
Board Size: 38mm×38mm
Hole Pitch: Compatible with 29mm, 30mm, 34mm
??????? ????:
1pcs 12.3MP IMX477 camera board with dust cap for Jetsons
1pcs 11.8"(30cm) camera cable
IMPORTANT NOTE
C/CS Lens is NOT INCLUDED.
Pi 2/3/4/Zero WON’T WORK WITH IT. ONLY THE COMPUTE MODULES DO.
The camera driver MUST be installed: https://github.com/ArduCAM/MIPI_Camera/tree/master/Jetson/IMX477/driver
It can't wo
CODE: B0279
????:This camera is mainly designed for the Jetson Nano. It can also be used on the Raspberry Pi Compute Module (like CM3, CM3+), but is not compatible with standard Raspberry Pi models (like Raspberry Pi 3/3B+/4).
????????:
A Can't-Miss Update to IMX219 - Much better picture quality and lens flexibility, thanks to 53% more pixels, 92% larger pixel size, 192% larger imaging area, and a CS-Mount. Maximum still resolution at 4056 × 3040, frame rates: 30fps@Full 12.3MP, 60fps@1080P. NOTE:
Accelerated by Jetson Hardware ISP Engine - Support NVIDIA Argus Camera plugin for H264 encoding, JPEG snapshots, as well as gain, exposure, framerate, and group, hold control.
Only a driver away from Plug-and-Play - The Raspberry Pi HQ camera module requires hardware modification before installing the Jetson IMX477 driver, which could bring potential damage and void the warranty. Ours don't.
4-Lane Camera for the Future - Route out all 4 data lanes to the camera connector for customized carrier boards with 4-lane CSI connector and future 4-lane camera driver updates.
????????:
Sensor: IMX477
Optical Format: 1/2.3″ (diagonal 7.857mm)
Resolution: 4056(H) x 3040(V) 12.3MP
Pixel Size: 1.55um x 1.55um
IR Sensitivity: Visible light
Interface: 4-lane MIPI CSI-2
Default Lens Mount: CS-Mount
Frame Rate: Due to Jetson Xavier NX/Nano hardware only supports 4K@30fps h.264/h.265 encoding, you cannot use it for 4K@60fps.
Board Size: 38mm×38mm
Hole Pitch: Compatible with 29mm, 30mm, 34mm
??????? ????:
1pcs 12.3MP IMX477 camera board with dust cap for Jetsons
1pcs 11.8"(30cm) camera cable
IMPORTANT NOTE
C/CS Lens is NOT INCLUDED.
Pi 2/3/4/Zero WON’T WORK WITH IT. ONLY THE COMPUTE MODULES DO.
The camera driver MUST be installed: https://github.com/ArduCAM/MIPI_Camera/tree/master/Jetson/IMX477/driver
It can't wo
















