Wireless Charging Module 5V/300mA
Wireless Charging Module 5V/300mA
Introduction
Wireless charging modules uses an electromagnetic field to transfer energy between two objects. This is usually done with a charging station. Energy is sent through an inductive coupling to an electrical device, which can then use that energy to charge batteries or run the device. This is a new wireless charging module, which could provide 5V@300mA power output. It is using the new technology "resonant magnetic coupling, which will reduce the electricity consumption during power transmission. The transfer efficiency could arrive at 90%. It could meet your most project requests.
Specification
- Operating Voltage (Input): 5V
- Magnetic coupling resonance technique
- Operating Voltage (Output): 5±6%V@300mA (Max: 600mA)
- Transmitting Terminal Size: 33mm±3mm(1.3")(Outer diameter)*5mm(0.2")(Inside diameter)*1mm(0.04")(Thickness)
- Receiving Terminal Size: 21mm±3mm(0.83")(Outer diameter)*10mm(0.4")(Inside diameter)*0.79mm(0.03")(Thickness)
- Operating Distance: 2-10mm (0.08-0.39")
Documents
Shipping List
- Transmitting Module x1
- Receiving Module x1
| Specification | |
| Accuracy | ±6% |
| Cable Lenght | 5cm |
| Connector | Gravity |
| Output | Analog |
| Resolution | 2-10mm (0.08-0.39") |
| Power | 5V |
| Range Output | 5±6%V@300mA (Max: 600mA) |
