Incremental Photoelectric Rotary Encoder - 400P/R
Incremental Photoelectric Rotary Encoder - 400P/R
Introduction
This is an industrial incremental photoelectric rotary encoder with aluminum material, metal shell and stainless steel shaft. It generates AB two-phase orthogonal pulse signal though the rotation of the grating disk and optocoupler. 400 pulses/round for each phase, and 1600 pulses/round for dual-phase 4 times output. This rotary encoder supports max 5000 r/min speed. And it can be used for speed, angle, angular velocity and other data measurement.
The photoelectric rotary encoder has a NPN open collector output. It could work with Microcontroller with internal pull-up resistors directly. And it is using 750L05 voltage regulator chip, which has a DC4.8V-24V wide range power input, compatible with Arduino, STM32, PLC and other types of microcontrollers.
Specification
- Supply Voltage: 4.8V ~ 24v
- Encoder Body Size: Φ39× 36.5mm
- Output Shaft Diameter: Φ6 × 13mm
- Outside Shaft Platform: Φ20 × 4.85 mm
- Fixing Holes Screws: M3
- Weight: 234 g
Documents
Shipping List
- Encoder x1
- Encoder mounting bracket x1
- 6mm coupling x1
- Screw accessories x1
- 10K resistance x2
| Specification | |
| Baud Rate | 9600 bps |
| Cable Lenght | 100cm |
| Connector | Gravity |
| Output | Digital |
| Power | 4.8V ~ 24v |
| Range Output | 400 pulses/round each phase and 1600 pulses/round for dual-phase |
