0.96 Inch OLED Display Module For Raspberry Pi
0.96 Inch OLED Display Module For Raspberry Pi
Introduction
Sometimes your Raspberry Pi projects require a display to output system information, e.g. system status, temperature, IP address, etc. Having a full sized display attached is inconvenient if you want your project to be portable. Use this small OLED to output your required information and keep your product in a nice portable configuration. The display is a 0.96" 128 x 64 px OLED. The controller is a SSD1306 and communicates via 4-wire SPI. The display also includes a built in backlight and is high contrast with an extremely wide viewing angle.
Specification
- Operating Voltage: 3.3V (1.6~3.6V)
- Continuous Current: 12.25uA
- Maximum Current: 100uA
- Ultra low power supply
- Internal DC/DC voltage converter
- SPI driver support , AT 64MHz[TYP] 125MHZ[OB]
- FP frequency: 64fps[TYP] 368fps[OB]
- Dimension: 370*300mm/14.6*11.8 inches
Documents
Shipping List
- 0.96 Inch OLED Display Module For Raspberry Pi x1
| Specification | |
| Connector | Gravity |
| Output | SPI (AT 64MHz[TYP] 125MHZ[OB]) |
| Refresh rate | 64fps[TYP] 368fps[OB] |
| Power | 3.3V (1.6~3.6V) |
| Range Output | 0.96 inch |
