This waterproof temperature sensor kit use DS18B20 probe AS . It contains a probe with a resistor module. So it is easy to connect on the Arduino board.
The DS18B20 temperature sensor provides 9 to 12-bit (configurable) temperature readings over a 1-Wire interface so that only one wire (and ground) needs to be connected from a central microprocessor. Compatible with 3.0-5.5V systems.
Check 27 Pcs Sensor Kit for Arduino to get more sensors for Arduino.
SPECIFICATION
Operating voltage: 3.0~ 5.5V
±0.5°C Accuracy from -10°C to +85°C
Usable temperature range: -55 to 125°C (-67°F to +257°F)
9 to 12 bit selectable resolution
Uses 1-Wire interface- requires only one digital pin for communication
Unique 64 bit ID burned into chip
Multiple sensors can share one pin
Temperature-limit alarm system
Query time is less than 750ms
3 wires interface:
Type A
Red wire – VCC
Black wire – GND
Yellow wire – DATA
Type B
Red wire – VCC
Yellow wire – GND
Green wire – DATA
Stainless steel tube 6mm diameter by 35mm(1.34″) long
Cable diameter: 4mm(0.16″)
Length: 90cm(35.43″
SHIPPING LIST
Waterproof DS18B20 Digital temperature sensor (DFR0198) x1
Terminal sensor adapter (DFR0055) x1
Digital sensor cable (FIT0011)
Reviews
There are no reviews yet.